- Manuals
- Brands
- Pilz Manuals
- Relays
- PNOZ XV3P
- Operating manual
Safety relays
Hide thumbs
1
2
Table Of Contents 3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
- See Also[SOLVED] P0522 Code: Low Voltage In Engine Oil Pressure Sensor Circuit - Fix It Now!Honda Odyssey P0522: Oil Pressure Sensor/Switch → Low Input | Drivetrain ResourceP0522 – Engine oil pressure sensor/switch -low voltage – TroubleCodes.netTrouble code solution P0522: decoding, causes, resetting, meaning
- Contents
- Table of Contents
- Bookmarks
Table of Contents
-
Table of Contents
-
Introduction
-
Validity of Documentation
-
Using the Documentation
-
Definition of Symbols
-
Safety
-
Intended Use
-
Safety Regulations
-
Safety Assessment
-
Use of Qualified Personnel
-
Warranty and Liability
-
Disposal
-
For Your Safety
-
Unit Features
-
Safety Features
-
Block Diagram/Terminal Configuration
-
Function Description
-
Operating Modes
-
Timing Diagram
-
Installation
-
Wiring
-
Preparing for Operation
-
Operation
-
Status Indicators
-
Faults - Interference
-
Dimensions in MM
-
Technical Details
-
Safety Characteristic Data
-
Supplementary Data
-
Service Life Graph
-
20122
-
Remove Plug-In Terminals
-
Order Reference
-
Advertisem*nt
Quick Links
- 1 Block Diagram/Terminal Configuration
- 2 Operating Modes
- 3 Installation
- 4 Wiring
- 5 Faults - Interference
- Download this manual
PNOZ XV3P
}
Safety relays
Operating Manual 20122-EN-05
Table ofContents
Advertisem*nt
Table of Contents
Related Manuals for Pilz PNOZ XV3P
-
Relays Pilz PNOZ XV2 Operating Instructions Manual
(20 pages)
-
Relays Pilz PNOZ XV1P Operating Manual
Safety (29 pages)
-
Relays Pilz PNOZ XV1P Operating Instructions Manual
Emergency stop relay (16 pages)
-
Relays Pilz PNOZ XV3.1 Operating Instructions Manual
(16 pages)
-
Relays Pilz PNOZ XV3.1 Operating Manual
Safety relays (37 pages)
-
Relays Pilz PNOZ XV3.3P Operating Instructions Manual
(20 pages)
-
Relays Pilz PNOZ XV3.3P Operating Manual
Safety relays (24 pages)
-
Relays Pilz PNOZ XV2P Operating Instructions Manual
(17 pages)
-
Relays Pilz PNOZ X Series Operating Instructions Manual
(21 pages)
-
Relays Pilz PNOZ X Series Operating Instructions Manual
(17 pages)
-
Relays Pilz PNOZ X Series Operating Instructions Manual
(21 pages)
-
Relays Pilz PNOZ XV2.1P Operating Manual
Safety relays (29 pages)
-
Relays Pilz PNOZ XV3.1P Operating Manual
Safety relays (47 pages)
-
Relays Pilz PNOZ XV3.1P Operating Instructions Manual
(20 pages)
-
Relays Pilz PNOZ XV3.1P Operating Instructions Manual
(17 pages)
-
Relays Pilz PNOZ XV3.1P Technical Instructions
(16 pages)
Summary of Contents for Pilz PNOZ XV3P
- Page 1 PNOZ XV3P Safety relays Operating Manual 20122-EN-05...
- Page 2 Preface This document is a translation of the original document. All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made for internal purposes. Suggestions and comments for improving this documentation will be gratefully received.
-
Page 3: Table Of Contents
Safety features Block diagram/terminal configuration Function Description Operating modes Timing diagram Installation Wiring Preparing for operation Operation Status indicators Faults – Interference Dimensions in mm Technical details Safety characteristic data Supplementary data Service life graph Operating Manual PNOZ XV3P 20122-EN-05... - Page 4 Contents Remove plug-in terminals Order reference EC declaration of conformity Operating Manual PNOZ XV3P 20122-EN-05...
-
Page 5: Introduction
PNOZ XV3P Introduction Validity of documentation This documentation is valid for the product PNOZ XV3P. It is valid until new documentation is published. This operating manual explains the function and operation, describes the installation and provides guidelines on how to connect the product. -
Page 6: Safety
This gives advice on applications and provides information on special fea- tures. Safety Intended use The safety relay PNOZ XV3P provides a safety-related interruption of a safety circuit. The safety relay meets the requirements of EN60947-5-1, EN60204-1 and VDE0113‑1 and may be used in applications with E-STOP pushbuttons... -
Page 7: Use Of Qualified Personnel
Note for overvoltage category III: If voltages higher than low voltage (>50 VAC or >120 VDC) are present on the unit, connected control elements and sensors must have a rated insulation voltage of at least 250 V. Operating Manual PNOZ XV3P 20122-EN-05... -
Page 8: Unit Features
The circuit is redundant with built-in self-monitoring. The safety function remains effective in the case of a component failure. The correct opening and closing of the safety function relays is tested automatically in each on-off cycle. Operating Manual PNOZ XV3P 20122-EN-05... -
Page 9: Block Diagram/Terminal Configuration
III), Protective separation (overvoltage category II) Function Description The safety relay PNOZ XV3P provides a safety-oriented interruption of a safety circuit. When supply voltage is supplied the "POWER" LED is lit. The unit is ready for operation when the reset circuit Y39-Y40 and the start circuit S13-S14 are closed. -
Page 10: Operating Modes
Single-channel operation: No redundancy in the input circuit, earth faults in the start and input circuit are detected. Dual-channel operation with detection of shorts across contacts: Redundant input cir- cuit, detects PNOZ XV3P – earth faults in the start and input circuit, –... -
Page 11: Timing Diagram
Use the notch on the rear of the unit to attach it to a DIN rail. Ensure the unit is mounted securely on a vertical DIN rail (35 mm) by using a fixing ele- ment (e.g. retaining bracket or an end angle). Operating Manual PNOZ XV3P 20122-EN-05... -
Page 12: Wiring
Important for detection of shorts across contacts: As this function for detecting shorts across contacts is not failsafe, it is tested by Pilz during the final control check. If there is a danger of exceeding the cable length, we recommend the following test once the unit is installed: 1. -
Page 13: Preparing For Operation
Light guard or safety switch, de- tection of shorts across contacts via ESPE NOTICE With single-channel wiring the safety level of your machine/plant may be lower than the safety level of the unit (see Safety characteristic data). Operating Manual PNOZ XV3P 20122-EN-05... - Page 14 PNOZ XV3P NOTICE Operation with a light guard or safety switch It must not be possible to switch off the supply voltage for the PNOZ XV3P separately from the supply voltage for the light guard or safety switch. E-STOP wiring...
-
Page 15: Operation
The safety functions may only be checked by qualified personnel. Status indicators LEDs indicate the status and errors during operation: LED on POWER Supply voltage is present. START Start circuit is closed. CH.1 Safety contacts of channel 1 are closed. Operating Manual PNOZ XV3P 20122-EN-05... -
Page 16: Faults - Interference
LED "POWER" does not light: Short circuit or no supply voltage. In the case of an error, the delay-on de-energisation contacts may open before the delay time has elapsed. Dimensions in mm * with spring-loaded terminals Operating Manual PNOZ XV3P 20122-EN-05... -
Page 17: Technical Details
100 Ohm 100 Ohm Dual-channel without detection of shorts across contacts at UB 100 Ohm 100 Ohm 100 Ohm Dual-channel with de- tection of shorts across contacts at UB DC 10 Ohm 10 Ohm 10 Ohm Operating Manual PNOZ XV3P 20122-EN-05... - Page 18 DC13 (6 cycles/min) at 24 V 24 V 24 V Max. current Utilisation category of safety contacts delayed AC15 at 230 V 230 V 230 V Max. current DC13 (6 cycles/min) at 24 V 24 V 24 V Max. current Operating Manual PNOZ XV3P 20122-EN-05...
- Page 19 Conv. therm. current with 3 contacts 5,5 A 5,5 A 5,5 A Conv. therm. current with 4 contacts 4,8 A 4,8 A 4,8 A Conv. therm. current with 5 contacts 4,3 A 4,3 A 4,3 A Operating Manual PNOZ XV3P 20122-EN-05...
- Page 20 93 % r. h. at 40 °C Condensation during op- eration Not permitted Not permitted Not permitted EN 60947-5-1, EN EN 60947-5-1, EN EN 60947-5-1, EN 61000-6-2, EN 61326-3-1 61000-6-2, EN 61326-3-1 61000-6-2, EN 61326-3-1 Operating Manual PNOZ XV3P 20122-EN-05...
- Page 21 94 mm 94 mm Width 45 mm 45 mm 45 mm Depth 121 mm 121 mm 121 mm Weight 370 g 370 g 360 g Where standards are undated, the 2014-07 latest editions shall apply. Operating Manual PNOZ XV3P 20122-EN-05...
- Page 22 100 Ohm 100 Ohm Dual-channel without detection of shorts across contacts at UB 100 Ohm 100 Ohm 100 Ohm Dual-channel with de- tection of shorts across contacts at UB DC 10 Ohm 10 Ohm 10 Ohm Operating Manual PNOZ XV3P 20122-EN-05...
- Page 23 DC13 (6 cycles/min) at 24 V 24 V 24 V Max. current Utilisation category of safety contacts delayed AC15 at 230 V 230 V 230 V Max. current DC13 (6 cycles/min) at 24 V 24 V 24 V Max. current Operating Manual PNOZ XV3P 20122-EN-05...
- Page 24 Conv. therm. current with 3 contacts 5,5 A 5,5 A 5,5 A Conv. therm. current with 4 contacts 4,8 A 4,8 A 4,8 A Conv. therm. current with 5 contacts 4,3 A 4,3 A 4,3 A Operating Manual PNOZ XV3P 20122-EN-05...
- Page 25 93 % r. h. at 40 °C Condensation during op- eration Not permitted Not permitted Not permitted EN 60947-5-1, EN EN 60947-5-1, EN EN 60947-5-1, EN 61000-6-2, EN 61326-3-1 61000-6-2, EN 61326-3-1 61000-6-2, EN 61326-3-1 Operating Manual PNOZ XV3P 20122-EN-05...
- Page 26 94 mm 94 mm Width 45 mm 45 mm 45 mm Depth 121 mm 121 mm 121 mm Weight 360 g 360 g 370 g Where standards are undated, the 2014-07 latest editions shall apply. Operating Manual PNOZ XV3P 20122-EN-05...
- Page 27 100 Ohm 100 Ohm Dual-channel without detection of shorts across contacts at UB 100 Ohm 100 Ohm 100 Ohm Dual-channel with de- tection of shorts across contacts at UB DC 10 Ohm 10 Ohm 10 Ohm Operating Manual PNOZ XV3P 20122-EN-05...
- Page 28 DC13 (6 cycles/min) at 24 V 24 V 24 V Max. current Utilisation category of safety contacts delayed AC15 at 230 V 230 V 230 V Max. current DC13 (6 cycles/min) at 24 V 24 V 24 V Max. current Operating Manual PNOZ XV3P 20122-EN-05...
- Page 29 Conv. therm. current with 3 contacts 5,5 A 5,5 A 5,5 A Conv. therm. current with 4 contacts 4,8 A 4,8 A 4,8 A Conv. therm. current with 5 contacts 4,3 A 4,3 A 4,3 A Operating Manual PNOZ XV3P 20122-EN-05...
- Page 30 93 % r. h. at 40 °C Condensation during op- eration Not permitted Not permitted Not permitted EN 60947-5-1, EN EN 60947-5-1, EN EN 60947-5-1, EN 61000-6-2, EN 61326-3-1 61000-6-2, EN 61326-3-1 61000-6-2, EN 61326-3-1 Operating Manual PNOZ XV3P 20122-EN-05...
- Page 31 101 mm 101 mm Width 45 mm 45 mm 45 mm Depth 121 mm 121 mm 121 mm Weight 370 g 370 g 370 g Where standards are undated, the 2014-07 latest editions shall apply. Operating Manual PNOZ XV3P 20122-EN-05...
-
Page 32: Safety Characteristic Data
If the service life graphs are not accessible, the stated PFH value can be used irrespective of the switching frequency and the load, as the PFH value already considers the relay's B10d value as well as the failure rates of the other components. Operating Manual PNOZ XV3P 20122-EN-05... -
Page 33: Service Life Graph
To increase the service life, sufficient spark suppression must be provided on all output contacts. With capacitive loads, any power surges that occur must be noted. With DC con- tactors, use flywheel diodes for spark suppression. Operating Manual PNOZ XV3P 20122-EN-05... -
Page 34: 20122
PNOZ XV3P Remove plug-in terminals Procedure: Insert the screwdriver into the housing recess behind the terminal and lever the terminal out. Do not remove the terminals by pulling the cables! Operating Manual PNOZ XV3P 20122-EN-05... -
Page 35: Order Reference
European Parliament and of the Council. The complete EC Declaration of Conformity is available on the Internet at www.pilz.com/support/downloads. Representative: Norbert Fröhlich, Pilz GmbH & Co. KG, Felix-Wankel-Str. 2, 73760 Ost- fildern, Germany Operating Manual PNOZ XV3P... - Page 36 Back cover Support Technical support is available from Pilz round the clock. Americas Australia Scandinavia Brazil +61 3 95446300 +45 74436332 +55 11 97569-2804 Spain Canada Europe +34 938497433 +1 888-315-PILZ (315-7459) Austria Switzerland Mexico +43 1 7986263-0 +41 62 88979-30...
