Pololu - Raspberry Pi Expansion Boards (2024)

Compare all products in this category

Subcategories

Compare

Pololu Dual G2 High-Power Motor Drivers for Raspberry Pi

These G2 dual high-power motor drivers are add-on boards for the Raspberry Pi (Model B+ and newer), featuring pairs of discrete MOSFET H-bridges designed to drive two large brushed DC motors.

Compare

Motoron M2H Dual High-Power Motor Controllers for Raspberry Pi

The Motoron M2H family of dual high-power motor controllers makes it easy to control powerful DC motors from a Raspberry Pi through an I²C interface. Each stackable module can independently control up to two motors with currents up to 20A per channel.

Compare

Motoron M3H256 Triple Motor Controller for Raspberry Pi

The Motoron M3H256 triple motor controller makes it easy to control DC motors from a Raspberry Pi using I²C. Each stackable module supports motor supply voltages from 4.5V to 48V and can independently control up to three motors with continuous output currents up to 2A per channel.

Compare

Motoron M3H550 Triple Motor Controller for Raspberry Pi

The Motoron M3H550 triple motor controller makes it easy to control DC motors from a Raspberry Pi using I²C. Each stackable module supports motor supply voltages from 1.8V to 22V and can independently control up to three motors with continuous output currents up to 1.7A per channel.

Products in category “Raspberry Pi Expansion Boards”

Pololu item #:3117
Brand:Pololu
Status:Active and Preferred

This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.8A per channel to two brushed DC motors. An efficient voltage regulator (2.7V to 11V input) and level shifters enable it to power and communicate with a Raspberry Pi. This version (item #3117) is assembled with selected through-hole connectors and components installed for use as a Raspberry Pi add-on.

Pololu item #:3116
Brand:Pololu
Status:Active and Preferred

A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge (SMT Components Only)

This programmable module is designed to be the core of a small robot, either as an auxiliary controller atop a Raspberry Pi base or as a complete control solution on its own. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader. On-board hardware includes dual motor drivers that can deliver 1.8A per channel and an efficient voltage regulator that allows the controller to work with a 2.7V to 11V input voltage, along with level shifters that enable it to interface with a Raspberry Pi. This version (item #3116) does include any through-hole components or connectors, allowing for customized assembly or standalone use.

Pololu item #:3119
Brand:Pololu
Status:Active

A-Star 32U4 Robot Controller SV with Raspberry Pi Bridge

This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.7A per channel to two brushed DC motors. An efficient voltage regulator (5.5V to 36V input) and level shifters enable it to power and communicate with a Raspberry Pi. This version (item #3119) is assembled with selected through-hole connectors and components installed for use as a Raspberry Pi add-on.

Pololu item #:3118
Brand:Pololu
Status:Active

A-Star 32U4 Robot Controller SV with Raspberry Pi Bridge (SMT Components Only)

This programmable module is designed to be the core of a small robot, either as an auxiliary controller atop a Raspberry Pi base or as a complete control solution on its own. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader. On-board hardware includes dual motor drivers that can deliver 1.7A per channel and an efficient voltage regulator that allows the controller to work with a 5.5V to 36V input voltage, along with level shifters that enable it to interface with a Raspberry Pi. This version (item #3118) does include any through-hole components or connectors, allowing for customized assembly or standalone use.

Pololu item #:2762
Brand:Pololu
Status:Active and Preferred

Dual TB9051FTG Motor Driver for Raspberry Pi (Assembled)

This add-on board enables a Raspberry PiB+, PiA+, Pi2 or Pi3 to drive a pair of brushed DC motors. Its dual TB9051FTG motor drivers operate from 4.5V to 28V and can deliver a continuous 2.6A (5A peak) per motor. The default pin mappings make it easy to get started using our provided software, but the board also exposes most of the driver chips’ I/O pins for more specialized applications. This version ships fully assembled with connectors soldered in.

Pololu item #:2761
Brand:Pololu
Status:Active and Preferred

Dual TB9051FTG Motor Driver for Raspberry Pi (Partial Kit)

This add-on board enables a Raspberry Pi (Model B+ or newer) to drive a pair of brushed DC motors. Its dual TB9051FTG motor drivers operate from 4.5V to 28V and can deliver a continuous 2.6A (5A peak) per motor. The default pin mappings make it easy to get started using our provided software, but the board also exposes most of the driver chips’ I/O pins for more specialized applications. This version ships as a partial kit; all surface-mount components are installed, but the included through-hole connectors are not soldered in.

Pololu item #:2756
Brand:Pololu
Status:Active

Pololu Dual MC33926 Motor Driver for Raspberry Pi (Assembled)

This add-on board enables a Raspberry PiB+, A+, Pi2, or Pi3 to drive a pair of brushed DC motors. Its dual MC33926 motor drivers operate from 5V to 28V and can deliver a continuous 3A (5A peak) per motor. The default pin mappings make it easy to get started using our provided software, but the board also exposes most of the driver chips’ I/O pins for more specialized applications. This version ships fully assembled with connectors soldered in.

Pololu item #:2755
Brand:Pololu
Status:Active

Pololu Dual MC33926 Motor Driver for Raspberry Pi (Partial Kit)

This add-on board enables a compatible Raspberry Pi (Model B+ or newer), including the Pi 3 Model B+ and Model A+, to drive a pair of brushed DC motors. Its dual MC33926 motor drivers operate from 5V to 28V and can deliver a continuous 3A (5A peak) per motor. The default pin mappings make it easy to get started using our provided software, but the board also exposes most of the driver chips’ I/O pins for more specialized applications. This version ships as a partial kit; all surface-mount components are installed, but the included through-hole connectors are not soldered in.

Pololu item #:3759
Brand:Pololu
Status:Active

Dual MAX14870 Motor Driver for Raspberry Pi (Assembled)

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its pair of integrated MAX14870 motor drivers allows it to operate from 4.5 V to 36 V, making it a great control option for small motors that run on a wide range of voltages. The board can deliver a continuous 1.7A (2.5A peak) per motor. This version ships fully assembled with connectors soldered in.

Pololu item #:3758
Brand:Pololu
Status:Active

Dual MAX14870 Motor Driver for Raspberry Pi (Partial Kit)

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its pair of integrated MAX14870 motor drivers allows it to operate from 4.5 V to 36 V, making it a great control option for small motors that run on a wide range of voltages. The board can deliver a continuous 1.7A (2.5A peak) per motor. This version ships as a partial kit; all surface-mount components are installed, but the included through-hole connectors are not soldered in.

Pololu item #:2753
Brand:Pololu
Status:Active

Pololu DRV8835 Dual Motor Driver Kit for Raspberry Pi

This compact expansion board plugs directly into the GPIO header on a Raspberry PiB+, PiA+, Pi2, or Pi3 and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its integrated DRV8835 dual motor driver allows it to operate from 1.5 V to 11 V, making it a great control option for low-voltage motors. The board can deliver a continuous 1.2A (1.5A peak) per motor, or a continuous 2.4A (3A peak) to a single motor when configured with both channels connected in parallel.

Pololu item #:3544
Brand:Pololusupply outlook
Status:Active and Preferred

Romi 32U4 Control Board

The Romi 32U4 Control Board turns the Romi chassis into a programmable robot based on the Arduino-compatible ATmega32U4 MCU. Its features include integrated dual motor drivers, a versatile power circuit, and inertial sensors, as well as connections for quadrature encoders and an optional LCD. The board also has the ability to interface with an added Raspberry Pi, making the foundation for a complete Raspberry Pi-controlled Romi robot.

Pololu item #:3575
Brand:Pololusupply outlook
Status:Active and Preferred

Balboa 32U4 Balancing Robot Kit (No Motors or Wheels)

Build your very own programmable balancing robot with the Balboa 32U4 robot kit! The Balboa control board features an Arduino-compatible ATmega32U4 MCU, motor drivers, quadrature encoders, and a full IMU. This board also has the ability to interface with a Raspberry Pi, making the foundation for a complete Raspberry Pi-controlled balancing robot. Motors and wheels are not included: choose your wheels and motors to personalize your robot.

Related products

Aluminum Standoff for Raspberry Pi: 11mm Length, 6mm M2.5 Thread, M-F (4-Pack)
Stackable 0.100″ Female Header: 2x20-Pin, Straight
0.100" (2.54 mm) Female Header: 2x20-Pin, Straight
Aluminum Standoff for Raspberry Pi: 18.6mm Length, 6mm M2.5 Thread, M-F (4-Pack)
Stackable 0.100″ Female Header with Extra 0.3″ Spacer: 2x20-Pin, Straight
Machine Screw: M2.5, 6mm Length, Phillips (25-pack)
Machine Hex Nut: M2.5 (25-pack)

Related categories

Raspberry Pi
Shields for Arduino
Brushed DC Motor Drivers
Voltage Regulators

Home|Forum|Blog|Support|Ordering Information|Wish Lists|Distributors|BIG Order Form|About|Contact

© 20012024 Pololu Corporation

Pololu - Raspberry Pi Expansion Boards (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Sen. Ignacio Ratke

Last Updated:

Views: 5950

Rating: 4.6 / 5 (76 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Sen. Ignacio Ratke

Birthday: 1999-05-27

Address: Apt. 171 8116 Bailey Via, Roberthaven, GA 58289

Phone: +2585395768220

Job: Lead Liaison

Hobby: Lockpicking, LARPing, Lego building, Lapidary, Macrame, Book restoration, Bodybuilding

Introduction: My name is Sen. Ignacio Ratke, I am a adventurous, zealous, outstanding, agreeable, precious, excited, gifted person who loves writing and wants to share my knowledge and understanding with you.